Join our community in the tech forums for uncut technology discussion.
<< Back to Today's Tech News
Posted by Tekime on 2007-07-15 23:35:32
Once the latencies were eased up to 4-4-4-8, the modules feltvery relaxed and wanted to clock higher. Since the AW9D-MAX runs out ofsteam at about 470FSB, we had to use dividers to get the modules tooperate at a higher speed. We easily achieved 500MHz at 4-4-4-8 withjust 2.35V but we had to pump more voltage to get it going. We finallyended up at 550MHz (DDR2-1100) which required 2.55V to be stable. Thisis not bad considering that the latencies were pretty tight at 4-4-4-8.
Read More at PC Modding Malaysia
Join our community in the tech forums for uncut technology discussion.
| 
