Cooljag JAC304C Heatsink

I received my JAC304C today, and I'm posting a few prelim pics while I wait on the other parts. A JAC313C, Tweakmonster RAMsinks, Arctic Silver epoxy and Arctic paste are on their way. I should have everything within the week, and I can then get started testing these units out.

I owe many thanks to Alice Yang of Chia Cherne Industry Co. for sending me this heatsink. After weeks of searching for the 304C, Alice was kind enough to send me one at her own expense. Without her help I don't think I would have had the opportunity to try out this nice looking product.

First we will check out the specs of this unit.

I will most likely be upgrading the fan, but for now I'll use the stock cooling to see what you get out of the box. And of course, you're only here for the pics anyway, right?

A little beat up, but then again it did travel nearly 8,000 miles from Taichung.

Cooljag looks nice and cozy in there though.

A little close-up showing the model; we can also see it comes with a 23.3CFM fan.

And lo and behold, the JAC made it safely :-)

Looks a bit heftier than the 313C, and it certainly feels heavy.

It's not as bad as it looks; but I'll be lapping it to be sure.

Now, I just can't wait to test this thing out! I'm pushing it at 12,000 3DMarks, so we'll see if we can change that. Stay tuned for the JAC313C vs JAC304C showdown, and we'll find out who's boss ;)

Subject: Harumph..... Posted by: Tekime

I am in desperate need of a 5Kohm variable resistor before I can do anything more with my GF4 Right now it doesn't appear to be limited by heat, but rather voltage. One day, in the distant future, I will unlock this card's full potential... one day...